58″ Table HORIZONTAL / VERTICAL TURRET MILLING MODEL: VH-250VS-SP by Manford
Specifications
| Return Shipping Will Be Paid By | Buyer |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 14 Days |
| Spindle Horsepower | 5 hp |
| Machine Type | Turret Mill |
| Power Source | Electric |
| Table Length | 40 in - 59.9 in |
| MPN | VH-250VS |
| Spindle Taper | NST 40 |
| Z-Axis Travel Bed | 16 in - 20 in |
| Table Width | 10 in - 14.9 in |
| Brand | Manford |
| Function | Milling |
| X-Axis Travel Bed | 41 in - 60 in |
| Control | Manual |
| Model Year | 2022 |
| Max Spindle Speed (RPM) | 3501 - 4000 |
| Voltage | 230 V |
| Model | VH-250 |
| Y-Axis Travel Bed | 16 in - 20 in |
12 X 58” Table , long saddle, box way on Y & Z 5HP Heavy duty Vertical head with variable speed 50-3600rpm, Hi-Low speed change by gear transmission (with no timing belt). 7.5 HP Inverter driver NST#40 Spindle, Quill Dia. 110mm. Spindle is made from SCM-415 (SAE4115) Cr-Mo Alloy steel, then heat treated and precision ground. 5HP Horizontal Inverter motor with 48-240(Lo), 240-1180(Hi) spindle speed Turcite-B coated on the XY slideways and gibs. Hardened & Ground on the XYZ slideways and T-slot of table. XY axes use C5 pre-load double nut ball screws, no backlash and provide accurate positioning. Spindle bearing appliance with 7210(p4) Angular contact bearings. 1-1/2”(38mm) Diameter Lifting Screw. Leveling Screw & Plate On Base. Meehanite casting GC275 with annealing & stress relieving treatment. Auto-lubrication system Ram is moveable directly on extra heavy duty column without turret. All the slideways (column, table, saddle, ram and knee) are installed with rubber wiper. Lifting motor and control panel with electric box Direct construction on Ram & Column AC Servo motor on X & Y with variable speed change, both offer high working efficiency Electro-megnatic clutch on X & Y, protect work-piece or tools from damage Specification: Table:12”x 50” (350 x 1270mm) 12”x 58” (350 x 1473mm) T-Slot No.x Size:3” x 5/8” (3 x 16 mm) Longitudinal travel (W/O power feed ):35.4” (900mm) 50” table 43.4” (1100mm) 58” table Cross travel:15.7” (400mm) Travel of knee:17.7” (450mm) Ram travel:23.6” (600mm) Ram feed rate (ipm)45.2 (ipm) Auto feed rate XYZ axes (rpm)0-1500 Rapid feed rate XYZ axes -SP(Servo)118 ipm Quill travel:5-1/2” (140mm) Table to spindle nose (D):5.1”- 22.8” (130-580mm) Over swivel on turret:None Head Swivel ( R& L ):45º Head tilt ( UP& DOWN ):Option Spindle to column (F):7.3”-27” (185-685mm) Spindle motor:5HP, Inverter Motor (7.5HP Inverter Driver) Spindle taper:NST#40 Quill feed:0.0013” - 0.0027” - 0.0055” Spindle Speed (r.p.m.):( 60Hz) 50-3600 Horizontal Spindle speed (rpm)48-240 (Lo), 240-1180(Hi) TaperNST#40 Spindle center to column front surface:15.7" (400mm) Spindle nose to table surface:0.78" - 18.5" (20-470mm) Spindle center to Ram bottom surface:6.7" (170mm) XY axes motor (HP):0.8 Kw Servo motor Lifting motor:1 HP Coolant pump:1/6 HP Overall height (A):100.4” (2550mm) Overall depth (B):84.6” (2150mm) Overall width (C):77.55” (1970mm) Net Weight:5500 lbs. (2500Kgs) TURRET MILLING MACHINES MODEL SPINDLE HEAD TABLE SIZE USD $ SPINDLE SPEED MOTOR VH-250VS-SP NST#40 VARIABLE SPEED 5HP/3PH 12"X50" 37,800 STANDARD ACCESSORIES Tools & box/Leveling bolts & plates/Drawbar (manual)/Auto-lubrication/ Coolant system/ Quartz work light/ motor/Dial indicator Simple spindle tapping device/ XY ballscrew/Electrical box/ Lifting Motor Remark: 1. Horizontal spindle: 5HP/Hi-Low gear box (inverter variable speed) 2. Standard with variable speed spindle motor 5HP/220V with Inverter 7.5HP/220V OPTIONAL ACCESSORIES ( EXTRA COST) SPECIFICATION USD.$ Base splash guard 300 Column splash guard (left & right) 800 Airpower drawbar NST#40 800 Wooden crate packing 200 CE/CSA electric box extra 1000 12" x 58" Table 800 TRANSFORMER NEEDED IF OTHER THAN 220V 10 KVA 1200 Newall DP-700 3-axis DRO package 2900 STOCK VH-250VS-SP NEW MANFORD VERTICAL/HORIZONTAL MILLING PACKAGE DEAL FOR $40,000 ALL INCLUDED: MACHINE MODEL VH-250VS-SP WITH STANDARD EQUIPMENT. 5HP INVERTER MOTOR WITH DELTA 7.5 HP INVERTER, NST#40, X&Y AXIS SERVO MOTORS, Z AXIS LIFTING MOTOR. INCLUDING: XY BALL SCREWS / SPINDLE TAPPING DEVICE / LEVELING SCREWS / COOLANT SYSTEM / ELECTRICAL BOX & SWIVEL PANEL / AUTO LUBRICATION / TOOL BOX & TOOLS / BASE SPLASH GUARD / MANUAL DRAWBAR / COLUMN SPLASH GUARD (L&R) / RUBBER CHIP COVER ON Y AXIS / 1"x20" #40 ARBOR WITH RUNNING BUSHINGS AND SPACERS. / VOLTAGE: 220/3/60 OPTIONAL ACCESSORIES ARE ALL INCLUDED AIR POWER DRAWBAR, VERTICAL SPINDLE, NST#40 AIR POWER DRAWBAR, HORIZONTAL SPINDLE, NST#40 DIAL MICROMETER FOR QUILL STROKE LCD QUILL SCALE 12" x 58" TABLE, 51" SADDLE & X AXIS TRAVEL UL ELECTRICS. ELECTRIC BOX LOCKABLE SWITCH THAT CAN BE PADLOCKED AND NOT ABLE TO OPEN DOOR WITH IT IN OFF POSITION. CABINET HAVE 110V TWIST-LOCK RECEPTACLE FOR DRO POWER. LED WORK LIGHT, DIRECT WIRED TO ELECTRICAL BOX SAFETY GUARDING ON SPINDLE TABLE GUARDING NEWALL DP700 3-AXIS DRO, INSTALLED - Z AXIS ON KNEE X AXIS TRAVEL 40". LOCK CONNECTION TO PLUG INTO ELECTRICAL CABINET. 52 PIECE CLAMP KIT HOUR METER INCLUDED.